Polylite ABS

PolyLiteTM ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.

Download Brochure

PRINT SETTINGS
Nozzle Temperature: 245°C – 265°C
Printing Speed: 30mm/s – 50mm/s
Bed Temperature: 90°C – 100°C
Bed Surface: BuildTak®, PEI sheet with ABS slurry
Cooling Fan: LOW for better surface quality, OFF for better strength

MECHANICAL PROPERTIES
Young’s Modulus: 2174 ± 285 Mpa
Tensile Strength: 33.3 ± 0.8 Mpa
Bending Strength: 72.8 ± 0.7 Mpa
Charpy Impact Strength: 12.6 ± 1.1 kJ/m2

THERMAL PROPERTIES
Glass Transition Temperature: 101°C
Vicat Softening Temperature: 104°C
Melting Temperature: N/A

NOTES
Drying Settings: 70°C for 6h
Recommended Support Materials: N/A
Other: N/A
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters


Reviews

There are no reviews yet.

Be the first to review “Polylite ABS”

Your email address will not be published.