PolySupport
PolySupport is a break away support for Polymaker PLA based filaments. It has a perfect interface with PLA, strong enough to support it and easily removable by hand.
Print Settings :
Nozzle Temperature : 220C - 230C
Printing Speed : 20mm/s - 40mm/s
Bed Temperature : 25C - 60C.
Bed Surface : Glass with glue, blue tape, BuildTak, etc.
Cooling Fan : ON/OFF
Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Drying Settings: 55C for 6h
(Only if the material has absorbed moisture)
Reviews
There are no reviews yet.